Skip to content
Select language

Surface drainage

Surface drainage systems are essential for the safe removal of excess water from heavy rainfall.

HAURATON offer an extensive range of surface water drainage systems that accommodates any environment from logistic facilities to public squares. They meet all the relevant regulations, standards and legislation.

Find the right surface drainage system for your project by selecting one of the tabs below; from ultra heavy duty to light duty. 

Get in touch

Drainage systems for areas subject to extreme loads and dynamic forces

Surface drainage installed within industrial yards, container terminals and airports are exposed to extreme surface loads and dynamic forces with a combination of diverse traffic patterns (accelerating, braking, turning), lateral movements and varied wheel configurations.

The channel systems below have proven performance in demanding environments subject to ultra heavy loads & forces.

Comparison of recommended products

Product visualisation FASERFIX SUPER
Product illustration of a RECYFIX HICAP
FASERFIX SUPER
RECYFIX HICAP F
RECYFIX MONOTEC ULTRA
Extremely resistant to heavy loads and dynamic forces.
High capacity slot channel for areas subject to extreme loads & dynamic forces.
Monolithic drainage channel for heavy-duty applications
Load class according to EN 1433
Load class according to EN 1433
up to F 900
up to F 900
F 900
Load frequency
Load frequency
Load dynamics
Load dynamics
Nominal width | System size
Nominal width | System size
100, 150, 200, 300, 400, 500
1000, 2000, 3000, 5000, 8000, 10000
NW 200 & 300
Materials of the lower parts
Materials of the lower parts
Fibre-reinforced concrete
Modified polypropylene (PP), 100 % recycled composite
Modified polypropylene (PP), 100 % recycled composite
Angle housing
Angle housing

Galvanised steel or ductile iron edge rail with 40 x 40 mm insertion depth

Grating variants
Grating variants

– Ductile iron gratings
– GUGI ductile iron gratings

Retained ductile iron slotted top

Cast iron attachment with concrete anchorage on the side

Special characteristics
Special characteristics

– SIDE-LOCK, boltless locking system
– 16 fixing points for grating/metre

– Radial installations possible
– Large channels for retention
– Chanel run without slotted top achievable, for example, under planted areas
– Cables installations can be threaded though throat voids of the channel

– Material combination of recycled PP and cast iron for on-site adaptability, as well as robustness

-Lateral wings for optimal connection to the concrete surface

-No screws and loose parts on the surface

-Connection between channel and grating encased in concrete for extra safety

Gradient
Gradient

– Constant depth
– Built-in fall (150, 200, 300)
– Stepped fall

– Constant depth
– Stepped fall

– Constant depth
– Stepped fall (NW 200)

Reference highlights

Get an insight into how our products have been utilised within ultra heavy duty applications. Let yourself be inspired.

Drainage systems for heavy loads

Continual traffic from lorries, forklifts and commercial vehicles can place high demands on drainage channels. The complete surface drainage system (channel & installation) must be designed to cope with the appropriate static load weight.

The below linear drainage systems offer environments durable systems with reliable performance and practical design.

Comparison of recommended products

Product illustration of FASERFIX KS
Product Illustration of RECYFIX NC drainage channel
FASERFIX KS
RECYFIX NC
Efficient drainage channel for areas with vehicle & pedestrian traffic.
High performance reinforced polypropylene channel.
Load class according to EN 1433
Load class according to EN 1433
up to F 900
up to E 600
Load frequency
Load frequency
Load dynamics
Load dynamics
Nominal width | System size
Nominal width | System size
100, 150, 200, 300
100, 150, 200, 300, 400
Materials of the lower parts
Materials of the lower parts
Fibre-reinforced concrete
Modified polypropylene (PP), 100 % recycled composite
Angle housing
Angle housing

Galvanised or stainless steel frame with 20 x 20 mm insertion depth

Moulded as an integral part of the channel body

Grating variants
Grating variants

– Design gratings FIBRETEC and METROPOLIS
– Perforated gratings
– GUGI mesh gratings
– Mesh gratings
– Longitudinal bar gratings
⇒ Made of ductile iron, composite, galvanised or stainless steel

Ductile iron

Special characteristics
Special characteristics

– SIDE-LOCK, boltless locking system
– Optional bar and bolt fixing per grating

– Channel and cover = one component
– Self-centring screw –> automatically finds the correct position
– Polypropylene channel body can be easily machined on site

Gradient
Gradient

– Constant depth
– Built-in fall
– Stepped fall

– Constant depth
– Stepped fall

 

Reference highlights

Get an insight into how our products have been utilised within heavy duty applications. Let yourself be inspired.

Drainage systems subject to medium loads  

Public and commercial areas such as car parks, retail outlets, business units, educational institutions and railway stations are frequently trafficked by vehicles and pedestrians.

These types of environments require surface water drainage systems with durability, resistance and aesthetic design, with either decorative and heelsafe gratings or discreet surface detail to complement contemporary design.

The systems below meet and exceed all requirements for public and commercial applications, even surfaces exposed to occasional heavy traffic from service vehicles.

Comparison of recommended products

Product illustration of a RECYFIX MONOTEC drainage channel
Product illustration of a RECYFIX PRO drainage channel
Product illustration of a RECYFIX PLUS drainage channel
Product illustration of a SLOTTED CHANNEL
RECYFIX MONOTEC
RECYFIX PRO
RECYFIX PLUS
SLOTTED CHANNEL
Robust monolithic drainage system for areas with frequent traffic.
Corrosion-free drainage system for commercial and public areas.
Durable drainage channel with a protective edge rail.
Discreet slot drain for public spaces, retail & commercial areas & façades.
Load class according to EN 1433
Load class according to EN 1433
up to D 400
up to D 400
up to D 400
up to D 400
Load frequency
Load frequency
Load dynamics
Load dynamics
Nominal width | System size
Nominal width | System size
100 & 200
100, 150, 200, 300
100, 140, 200, 300
100, 150, 200
Materials of the lower parts
Materials of the lower parts
Modified polypropylene (PP) , 100 % recycled composite
Polypropylene (PP), 100 % recycled composite
Polypropylene (PP), 100 % recycled composite
Polypropylene (PP), 100% recycled composite
Angle housing
Angle housing

Composite frame 20 x 20 mm insertion depth

Integrated edge rail made of galvanised or stainless steel

Grating variants
Grating variants

Integrated award-winning FIBRETEC heelsafe grating

– Longitudinal bar grating
– GUGI design gratings
– Mesh gratings
– FIBRETEC and METROPOLIS design gratings
⇒ Made of ductile iron, plastic, galvanised steel, stainless steel

– Perforated gratings
– Mesh gratings
– GUGI design gratings
⇒ Made of ductile iron, galvanised steel, stainless steel

– Slot gratings made of galvanised or stainless steel (V2A, V4A)
– Duo slot gratings
– Symmetrical & asymmetrical versions

Special characteristics
Special characteristics

– Large retention volume despite slim channel design
– Monolithic drainage channel
– Vandalism-proof
– Easy cleaning via the inspection box

– Pre-assembled ready for installation
– Low weight, easy to handle and install
– Channel body can be easily machined, cut to size on-site

– Pre-assembled ready for installation
– Low weight
– Steel edge rail enables straight edge of tarmacked surfaces
– Channel body made of polypropylene can be easily machined, cut, drilled on-site

– Unique connection technology of the slot tops
– Removeable access tray

Accessibility
Accessibility





Gradient
Gradient

– Constant depth
– Stepped fall

– Constant depth
– Stepped fall

– Constant depth
– Stepped fall

– Constant depth
– Stepped fall

Product material
Product material





Nominal size
Nominal size





Maximum flow performance
Maximum flow performance





ByPass
ByPass





DN in-/outlet
DN in-/outlet





Application area
Application area





Reference highlights

Get an insight into how our products have been utilised within medium duty applications. Let yourself be inspired.

Drainage systems for areas subject to light loads

When it comes to channel drainage for areas such as roof terraces, flat roofs, balconies and façades, linear drainage needs to be aesthetic, safe, accommodate shallow installation depths and be designed for barrier-free thresholds.

Systems installed within courtyards, and public /landscaped areas can be subject to heavy pedestrian use as well as light commercial traffic, therefore the appropriate channel load should be specified.

HAURATON’s range of systems for light load applications combines hydraulic functionality with elegant design, with a variety of channel depths and gratings available up to C 250.

Comparison of recommended products

Product illustration of a RECYFIX STANDARD drainage channel
Product presentation RECYFIX POINT
Product illustration of TOP X
Product presentation of RECYFIX NC
Product presentation of DACHFIX POINT
RECYFIX STANDARD
RECYFIX POINT
TOP X
DACHFIX STEEL
DACHFIX POINT
Recycled polypropylene channel suitable for pedestrians & light commercial traffic.
Point drainage for paved areas: courtyards, walkways and public squares.   
For domestic applications such as driveways, courtyards, patios and gardens.
Regulation-compliant drainage for façades, flat roofs & balconies.
Point drainage for flat roofs, balconies and roof terraces.
Load class according to EN 1433
Load class according to EN 1433
up to C 250
up to C 250
A 15
A 15
A 15
Load frequency
Load frequency
Load dynamics
Load dynamics
Nominal width | System size
Nominal width | System size
100, 150, 200, 300
30/30
115, 135, 155, 205, 255
30/30 & 40/40
Materials of the lower parts
Materials of the lower parts
Polypropylene (PP), 100 % recycled composite
Polypropylene (PP), 100 % recycled composite
Composite, black or silver
Galvanised or stainless steel
Angle housing
Angle housing

Integral polypropylene edge (visible on the surface)

Galvanised steel
or stainless steel

Grating variants
Grating variants

– Mesh gratings
– Perforated gratings
– GUGI design gratings
⇒ Made of ductile iron, galvanised steel or stainless steel

– Ductile iron star design
– Ductile iron longitudinal grating
– Galvanised steel mesh

– Mesh gratings
– Slotted gratings

– FIBRETEC design Grating
– Longitudinal bar gratings
– Perforated gratings
⇒ Made of composite, galvanised or stainless steel

– Longitudinal bar grating
– Mesh grating
⇒ Made of galvanised or stainless steel

Special characteristics
Special characteristics

– Pre-assembled ready for installation
– PP frame to stop lateral movements
– Low weight
– Channel body made of PP can be easily machined, cut, drilled on-site

– Pre-assembled ready for installation – complete point drain = one component
– Adaptable in many ways: connection options sideways/vertically, attachment frame for height adjustment
– Central connection to sewer system
– Integrated odour trap

– Many design options, channels and accessories in black or silver
– Direct paving possible
– Boltless grate locking due to secure clamping

– Height adjustment
– Perforation in the base, on-site connection

– Height adjustment through modular construction
– Connection options for branch sewer and pipe connection

Gradient
Gradient

– Constant depth
– Stepped fall

Reference highlights

Get an insight into how our products have been utilised within light duty applications. Let yourself be inspired.

Customised drainage solutions

Modern architecture can place specific demands on surface drainage in terms of length, width, height and design. Although our standard range of drainage channels are suitable for most applications, projects can require systems to be specially customised to match unique design features and meet specific needs on-site.

We can provide customised drainage solutions to suit specific requirements in terms of aesthetics and functionality. Channel and gratings can be manufactured in a range of materials, with polygon or radial designs for curved installations. A dedicated team works with you from the early design stage to discuss design requirements, right through to production, delivery and on-site installation support.

Product visualisation CUSTOM SLOTTED CHANNEL
Customised SLOTTED CHANNEL
Elegant, almost invisible drainage system for areas & squares with high aesthetic demands.
Load class according to EN 1433
Load class according to EN 1433
Load frequency
Load frequency
Nominal width | System size
Nominal width | System size
NW 100 – 150
Materials of the lower parts
Materials of the lower parts
Stainless steel (V2A CNS 1.4301, V4A CNS 1.4571) and galvanised steel (strip galvanised or hot-dip galvanised)
Angle housing
Angle housing

Grating variants
Grating variants

– Variable slot widths
– Double slot covers
– Asymmetrical and symmetrical

Special characteristics
Special characteristics

– Channel wall can be perforated on one or both sides
– Diverse solutions with numerous neck heights for the corresponding load classes
– Polygon and radial design possible
– Any size (radius, width, height)

 

Gradient
Gradient

Any configuration possible e.g. built-in fall

Reference highlights

Get an insight into how our products have been manufactured especially for these applications. Let yourself be inspired.

HAURATON product finder

Are you looking for a specific drainage product? With the product finder you will find the right channel for your project and further information for your planning, such as product illustrations, technical drawings (CAD) and tender texts.

The HAURATON Product Finder

Find the right product for your project, information for your planning, tender texts, product illustrations, technical drawings and CAD data etc.
Discover the variety of channel bases: Use the filters (nominal width, construction height, etc.) to narrow down your selection.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

Combination items include channel base and cover. Use the filters (nominal width, load class, etc.) to narrow down your selection.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

Grating and channel body merge into a single stable component in the monolithic channel. Filter by nominal width or construction height to narrow down your selection.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You are in the category . There are no matching products to your selection here. You may find suitable products for your specific search in another category.

There are no matching products for your selection. Please select other filters in the product finder.

These topics may interest you:

You are on this page:

Drainage icon
Drain

Drainage systems for effective rainwater management

Further core competencies can be found here:

Questions?

Our experienced planning team will be happy to help you.

Get in touch
Questions?