FASERFIX BIG BLS FASERFIX BIG BLS drainage channel as prefabricated reinforced concrete element
IDEAL FOR ... extreme loads in basically all concrete road surfaces, LAU facilities, aircraft operating areas, port facilities/container terminals, container terminals with „ReachStacker" loads, industrial and logistics areas, tunnel drainage, heavy-duty traffic areas, also in combination with rainwater treatment.
YOUR BENEFITS WITH FASERFIX BIG BLS
PREFABRICATED REINFORCED CONCRETE PART TYPE I ACCORDING TO EN 1433
- steel-reinforced concrete stretcher already integrated
- no formwork, reinforcement and in-situ concrete work required
- savings of 2 m sealing joint per channel metre
= Cost savings
CHANNEL IN 4 AND 5 M LENGTHS
- high laying performance ∙ 75 % or 80 % fewer channel butt joints (compared to 1 metre overall length)
- in the WHG sector 75 - 80 % fewer maintenance joints
= Cost savings | Time savings
LOAD BEARING CAPACITY ACCORDING TO INTERNATIONAL PARAMETER
= Longevity | Quality assured
LOAD BEARING CAPACITY ACCORDING TO INTERNATIONAL PARAMETER
- LCN Airport categorisation according to ICAO
- up to 100 tons axle load
- navigable for large aircrafts and reachstackers
= Longevity | Quality assured
CERTIFICATES AND APPROVALS
- tested statics of channel construction and foundation formation
- no additional external statics required
- with general building authority approval (abZ) through the DIBt (Z-74.4-141)
- with ASR performance test
- practical and realistic installation situations
= Cost savings | Quality assured
MATERIAL: LIQUID-TIGHT CONCRETE
- liquid-tight concrete subsequent to penetration test
- highest load capacity due to strength class C 60/75
- Exposure class: XF4, XC4, XM2, XD3, XA2
= Performance assured | Quality assured
FACTORY-MADE PE EXPANSION JOINT INSERT
- full-surface absorption of thermal stresses in longitudinal direction
- stop for the PE round cord of the sealing joint
- less consumption of sealing material
= Cost savings | Performance assured
ANGLE HOUSINGS
- 16-fold fixing possibility of the grating per metre (incl. 8-fold with optional screw connection)
- 40 mm inlaying depth
= Quality assured
THE SYSTEM IN DETAIL
Reinforced concrete prefabricated part made of concrete, strength category C60/75 with steel- or stainless steel angle housing. 16-fold fixing possibilty through boltless-locking mechanism SIDE-LOCK and additional fixing possibility. Length 4 or 5 m
Grating made of EN GJS-500-7, with 8-fold boltless locking mechanism SIDE-LOCK and addtional 8-fold fixing possibility per metre
prefabricated PE-expansion joint board
prefabricated PE-expansion joint board
Trash box with PE-HD-pipe and galvanised mud bucket
End cap closed
End cap closed